Woodburytype: notes

[collected. reference to collotype. & printing isn’t printmaking? ]

Woodburytype is a matrix formed of soft metal (like lead) by pressing a hardened gelatin image by high-pressure. The stannotype is made using very thin foil as the plate eliminating the need for the high pressure hydraulic machine[The Tangye Bros 18” Hydraulic Ram Press]. The woodburytype as made are tipped into publications. Three-color wasn’t achieved using the process because fine alignment was not achieved.

Intaglio is a broad term encompassing press process in which the ink sits in “carved site.” Printing is categorized by where the ink lies on the plate (matrix) not how the image is formed. Relief: ink is on raised portion; intaglio: the ink lies below the surface; planographic: the ink is on the surface of the matrix[ collotype].

a family: collotype, woodburytype, stannotype, photogravure

Key Names: Barret Oliver, and Two Palms.

Barret Oliver’s book is a history rather than a how-to. It is much about the past of the process. In 2007, his book A History of the Woodburytype was published by Carl Mautz Publishing He establishes his interest in an opening quote from William Crawford’s Keepers of Light, 1979:

“Every time a photographer solves an aesthetic problem he has to solve an underlying technical problem. One solution supports and influences the other. Granted, the photographer is infinitely more interesting than the photographic machine, and so are the things the photographer uses the machine to capture. But unless you understand the ways the machine cajoles and begrudges, you will never know how truly interesting the photographer is. You will not see the compromises he had to make in order to put his vision on paper.”

Barret: I use historic techniques, basically pre-industrial technologies. There's a point somewhere between 1885 and the turn of the century when industrially produced photographic materials become readily available, and they're manufactured in factories. They're industrially made and commercially sold. Before that, everything was made pretty much by the photographer or by small shops by hand. Those are relatively, and I use that word loosely, relatively easy to do on a small scale in a studio. The industrial stuff, like roll film, it's just impossible to do in a studio. [ link ]
This is more about his beginnings, and his reading of William Ivins. " As a photographer I have always relied on visual images as my primary means of communication ideas. But I realized I would have to start looking at the prints the way a historian would, and I would have to become versed in the language about communication of ideas, both through words and through images."

His book is interesting for his reasons of making images, as well as his interpretations of reproduction goals. As a text for production, that is yet to be written. My preference in ink&paper is the collotype. That information has been written for the updated world.

Two Palms [Craig Zammiello, etcher]
It is actually quite rare to have access to a hydraulic press that is as powerful as ours, and when our two master etchers joined the team, one of the first things they realized was the press’ potential to produce a Woodburytype. Our printers spent 10 years trying to perfect the necessary gelatin to make the lead printing plates (another failure).
We happened upon Barret Oliver during our research. He had just claimed to have successfully produced a Woodburytype print. We invited him to New York and brought him to meet Chuck Close. Over the course of a year, they made a group of fantastic Woodburytype portraits. Chuck’s Woodburytype image of Barack Obama is the first Woodburytype of an American President since Hessler & Ayer’s Woodburytype portrait of Abraham Lincoln, printed in 1881.
Two Palms...Evelyn Lasry: Our job is to help artists find new ways to make their work. We start somewhere and then try different approaches - the innovation comes out of process and necessity, rather than preconceived ideas.My husband David, who started the studio in 1994, was never officially trained as a printmaker so he has always been inclined to try things from out of left field. I think any good artist pushes boundaries, and we are lucky enough to get to help them do that.The biggest challenge in making art is keeping small failures from becoming large ones and never resting when we have success. Almost all of our great discoveries have come from some mistake, or even disaster, in the studio. If you can repeat a disaster twice, it becomes a technique.

REFERENCES

  • 1. Twyman Michael, “Printing 1770-1970 an illustrated history of its development and uses in England,” Eyre and Spotiswoode, London (1970). Google Scholar 2. Thirkell, Paul, Hoskins, Stephen, “A reassessment of past colour collotype printing achievements as a model for current digital, archival printing practice,” in IS&T SPIE PICS Digital Photography Conference, (2003). Google Scholar 3. Hoskins, Stephen, Thirkell Paul, “The relevance of 19th century continuous tone photomechanical printing techniques to digitally generated imagery IS&T,” in SPIE Electronic Imaging Conference, (2003). Google Scholar 4. Woodbury, Walter Bentley, “Woodbury’s New Printing Process,” British Journal of Photography, XII Google Scholar 5. Atkinson, A., “The creation of Digital Photographic Fine Art Print through the Woodburytype Model. 4.5.3 Alternatives to the Traditional Papers,” 76 (2005). Google Scholar
  • McCallion, P. (2014). The development of methods for the reproduction of texture in digitally printed artworks. In P. L. Harrison, E. Shemilt, & A. Watson (Eds.), Borders and Crossings: The Artist as ExplorerDuncan of Jordanstone College of Art and Design, University of Dundee
  • Close, C. Chuck Close. Two Palms Studios, New York 2012. Available from: http://www.twopalms.us/artists/ chuck-close 
  • Sultan, T. (2014) Chuck Close Prints: Process and Collaboration. 1st ed. Prestel Verlag.
  • Factum-Arte Woodburytype Prints: Redeveloping a 19th Century Print Process. Available from: http://www. 
  • factum-arte.com/pag/731/-span–span-Woodburytype–span—span–Prints—br–Redeveloping-a-19th- century-print-process Accessed 27 May 2016. 
  • WOODBURY, W.E., 01/01/1898. Stannotype. Scovill & Adams.
  • Wall, E.J. (1912) The Dictionary of Photography and Reference Book for Amateur and ProfessionalPhotographers. 9th ed. London: Hazell, Watson & Viney, Ld.
  • Tissandier, Gaston. History and Handbook of Photography. 1876. Gives a detailed account of how the process was used at the Goupil works in France, where it was known as Photoglyptie. Lon. Gaz. 23/3/1877, p. 2221.

alt Quest

questions begin conversations on lists. they also limit the list.

we are each limited by the questions we ask, but more significantly, by the questions we are willing to ask. To illustrate, I turn to this recent example from a list serve dedicated to “alt photographic processes.” Oddly this group is very distant, and different from my “alt” of the big photo revolution. We weren’t trying to duplicate Kodak, not even mimicing the cameras of Weston, Steichen, or Mortensen. Our goals were for easy assembly. Strong first impressions. Overthrowing the meanings of meaning. Taking the street from those inside buildings towering over the street.

Alt meant making. Alt meant the autographic element brought to photography. It wasn’t about chemistry, not at all. It was the hand of man over the handle of the machine.

the edited question concerns tri-color gum. the author wants to know how to achieve a green in the table cloth of the scene. The answers he recieves are generally correct. they lineup between pigment choices, and photoshop alterations, going as far as suggesting spot channels or even to just wait longer, doing more coatings. these answers reveal a process, both group wide and conventional. That process is to coat a surface, not a section, but a surface. They seem to me as though there was a need for large scale mechanical production of the image.
Though they coat by hand, they operate with an automatic approach. They produce hand works mechanically.

He who competes with the machine, becomes the machine. (after KV, Player Piano)

From my vantage I see that “a la poupee” could solve the problem. Even more, that this solution may open his aesthetic with very little change in technical skill.